Best Golf Club Regripping Kits in 2026: Three Home Vises Compared
Compare golf club regripping kits from lovivid, Crestgolf and AugFir, including vise mounting, tape quantities and the tools needed for a home grip change.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Prices and availability are accurate as of the time of publication and are subject to change.
The lovivid Golf Grip Regrip Kit is our best overall choice among golf club regripping kits for a first home project. Its table clamp and 15 pre-cut strips give a golfer with a suitable work surface a straightforward starting point. We compared listed components and mounting options, not hands-on performance.
| Product | Best for | Price |
|---|---|---|
| lovivid Golf Grip Regrip Kit | Best overall | View |
| Crestgolf Golf Repair Kit | Best for a workshop | View |
| AugFir Golf Grip Kit | Best for thicker tables | View |
How the golf club regripping kits differ
All three packages combine a table-mounted holder with tape, solvent and removal tools. The important differences are how the holder attaches and how much tape is specified. Measure the edge where the clamp will sit, including any lip underneath. A solid, level surface matters more than a large tabletop because a shaft can move if the clamp or furniture shifts.
lovivid Golf Grip Regrip Kit
lovivid Golf Grip Regrip Kit
The lovivid kit earns our overall pick because it pairs a compact table vise with 15 pre-cut, double-sided strips measuring 2 by 10 inches. Its included rubber sleeve is 3.5 inches long, while the hook blade, tape remover and solvent cover the principal stages of replacing a grip. The listing specifies a tabletop under 35 mm thick, so the kit makes most sense for a golfer with a thin, sturdy worktop and a full set of new grips ready to install. There are two spare strips beyond a 13-club job if one strip per club is used. The limitation is that a thick bench edge may not fit; check the actual edge rather than assuming a table clamp opens wide enough. Replacement grips are separate.
Pros
- Fifteen 2-by-10-inch strips leave two spares for a 13-club job
- The 3.5-inch rubber sleeve sits between the shaft and vise
- Hook blade and tape remover address two different removal steps
Cons
- The listed table thickness is under 35 mm
- Replacement grips must be purchased separately
Crestgolf Golf Repair Kit
Crestgolf Golf Repair Kit
Crestgolf is the workshop choice because its aluminum clamp can be attached without drilling or fixed with screws for a more permanent station. Its package lists 13 double-sided 2-by-10-inch strips, a hook knife, solvent and a tape-removal tool, with a rubber clamp to cushion the shaft. A golfer who expects to maintain several sets can choose a temporary setup initially and keep a dedicated workstation later. The supplied 13 strips match 13 clubs only if each grip needs one strip and none is wasted; buy extra for mistakes or extra build-up layers. The kit does not establish which grip size suits your hands, and new grips remain a separate purchase. A permanent mounting position also needs a suitable workbench.
Pros
- Aluminum vise offers both screw-fixed and drill-free mounting
- Thirteen 2-by-10-inch strips cover a 13-club job at one strip each
- Rubber shaft clamp and tape-removal tool are included
Cons
- Thirteen strips leave no spare in a 13-club job
- Screw mounting requires a suitable surface and holes
AugFir Golf Grip Kit
AugFir Golf Grip Kit
AugFir earns the thicker-table badge because its listing says the table vise can hold an edge up to 2.3 inches thick, a wider stated opening than lovivid's under-35-mm limit. Rubber sleeves and pads cushion the contact points, and the package lists 2-by-10-inch tape strips, solvent, a hook blade, gloves and a tape remover. It suits a golfer who needs a removable holder for a substantial table edge and wants gloves supplied with the tools. The listing does not state the tape count clearly enough to plan a full bag around it, so confirm the package contents or obtain spare strips before starting. As with the others, grips are not supplied and the holder still needs a stable surface.
Pros
- The vise is listed to fit table edges up to 2.3 inches thick
- Rubber sleeves and pads cushion the shaft and mounting surfaces
- Gloves are listed alongside the solvent and removal tools
Cons
- The listing does not clearly specify the number of tape strips
- Its larger clamp still needs a rigid table edge for support
What to prepare before changing grips
Choose replacement grips for your shaft and hand size before cutting anything. Count the clubs, allow extra tape for mistakes and any build-up wraps, and protect the work surface from solvent. Keep the blade away from the shaft, particularly graphite, and follow the tool and solvent instructions. A rubber holder helps cushion the shaft, but overtightening can still damage it.
Work in a ventilated place and give each new grip the drying time specified by the grip and solvent makers before play. If an old grip is to be reused or you are unsure how to avoid damaging a graphite shaft, a club repair shop is a sensible alternative.
Before ordering, compare the space under the table edge as well as its thickness. A brace or apron can prevent a clamp from reaching a flat surface. Consider where the club head will extend and leave room to work without knocking nearby objects. If the table serves another purpose, a removable mounting arrangement makes it easier to pack the tools away afterwards. A dedicated workshop can instead use Crestgolf's screw mounting when the bench is suitable and permanent holes are acceptable.
Frequently asked questions
Do these kits include replacement golf grips?
No replacement grips are listed with these three tool kits. Select grips separately in the right size and core for your clubs, then count how many you need. A putter grip can differ from the grips on woods and irons, so include it in your plan instead of assuming every club takes the same grip.
How many tape strips should I buy for a full set?
Count the clubs you plan to regrip, then allow spare strips for mistakes and any extra layers used to adjust grip thickness. Lovivid lists 15 strips and Crestgolf lists 13. AugFir lists strips but does not clearly state their quantity, so check the current package before relying on it for a full set.
Can I use a kitchen table as a regripping station?
Only if the edge fits the clamp and the table is rigid enough to hold the club without moving. Lovivid specifies an edge under 35 mm; AugFir states up to 2.3 inches. Protect the surface from solvent, avoid fragile or glass tops, and follow the mounting and safety instructions for the selected kit.
Prices and availability are accurate as of publication and may change.