Best Hook-and-Loop Mallet Putter Headcovers in 2026: Three Fits Compared
Compare hook-and-loop mallet putter headcovers for oversized, heel-shafted and midsize heads, with practical advice on fit, material choices and closure care.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Prices and availability are accurate as of the time of publication and are subject to change.
The Montela Mesh Mallet Putter Cover is our best overall choice among hook-and-loop mallet putter headcovers for a heel-shafted club. Its published outside dimensions make it easier to assess fit, although measuring the putter remains essential.
A cover has a simple job: keep a putter head from rubbing against other clubs while staying attached between greens. The wrong shape can leave a flap under tension or expose the shaft opening, however attractive the material. We compared listing specifications for three covers with hook-and-loop closures; none was evaluated through hands-on testing. The dimensions below are seller figures, so treat exterior measurements as a starting point rather than guaranteed internal clearance.
| Product | Best for | Price |
|---|---|---|
| Montela Mesh Mallet Putter Cover | Best overall | View |
| PGC Oversize Neoprene Mallet Cover | Best for larger heads | View |
| 19th Hole Clover Midsize Headcover | Best for midsize putters | View |
Best hook-and-loop mallet putter headcovers compared
Montela Mesh Mallet Putter Cover
Montela Mesh Mallet Putter Cover
Montela earns the overall recommendation because its listing gives a useful 4.7 by 5.1 by 1.6 inch outside size and specifies a heel-shafted mallet shape. That makes it a sensible starting point for players who can compare their putter's outline and shaft position before ordering. It uses mesh and neoprene with a hook-and-loop flap, and the seller states it suits right- and left-handed clubs. Its understated black finish is easier to coordinate than a large graphic. The important limitation is that outside dimensions include the material and do not prove the space inside. A centre-shafted head or one with unusual wings can still be a poor fit even when its width looks close.
Pros
- Published outside dimensions help narrow the fit for a heel-shafted head
- Mesh and neoprene construction offers a flexible alternative to PU covers
- The black finish suits players who prefer a plain bag
Cons
- The listed size is external, so internal clearance is smaller
- Heel-shaft layout is a poor assumption for a centre-shafted putter
PGC Oversize Neoprene Mallet Cover
PGC Oversize Neoprene Mallet Cover
The PGC earns the larger-head badge because its listing describes an oversize mallet cover intended for many larger heads. It uses soft black neoprene and a hook-and-loop closure, rather than the PU exterior of the 19th Hole option. The seller specifies right- and left-handed putters with shafts that are not centre-mounted, a useful distinction before ordering. Choose it if you need a cover for a larger mallet and prefer a plain finish. Its major limitation is the lack of complete published fit dimensions: an oversize label alone does not establish clearance for a particular head. Check the opening and ask the seller about internal width and depth, especially if the head has wide rear wings.
Pros
- Oversize mallet design targets larger heads rather than compact blades
- Soft neoprene offers a different material from the synthetic PU option
- Seller specifies both right- and left-handed non-centre-shafted putters
Cons
- The listing does not give complete dimensions for assessing fit
- The stated shaft compatibility excludes centre-shafted putters
19th Hole Clover Midsize Headcover
19th Hole Clover Midsize Headcover
The 19th Hole cover is our midsize choice because it specifically targets blade and midsize mallet putters instead of claiming to wrap every oversized shape. Black synthetic PU forms the exterior, black velvet lines the inside, and embroidered clover and horseshoe motifs give it a more distinctive appearance than the other two. A hook-and-loop closure secures the opening. This is a good option for a compact head whose owner wants a soft lining and decorative stitching without moving to a large mallet cover. Its tradeoff is sizing information: the listing does not state a full set of measurements. Do not assume that a deep, full-size mallet or an unusually placed shaft will fit merely because it is called a mallet.
Pros
- Designed for blade and midsize mallet shapes rather than oversized heads
- Black velvet lining places a soft surface against the putter
- Embroidered clover and horseshoe distinguish it from plain covers
Cons
- A full set of fit dimensions is not published in the listing
- Compact midsize design is not a safe assumption for a deep full mallet
How to choose the fit
Measure the head across its widest point, from face to rear and from sole to top. Then note where the shaft enters. A heel opening can pull awkwardly against a centre shaft even when the head itself fits. Compare the outline as well as the numbers: projections, alignment wings and weights can catch the flap. When a seller publishes exterior measurements, allow for the thickness of the cover and ask about internal measurements if the fit is close.
Hook-and-loop fasteners need clean contact to close properly. Press the two sides together along the flap and check that no part of the head forces it open. Remove grass and lint from the fastener as they accumulate, and let a wet cover dry before storing it with the club. These are practical care steps, not a promise that any cover is waterproof.
Think about how the cover will sit in your bag, too. The flap should meet without stretching over the back of the head, and the shaft should emerge through the opening without pulling the material sideways. If the head has protruding weights or wings, include them in your measurements. A cover that closes only when forced may open in transit. When a listing leaves the internal depth unclear, ask the seller before ordering and compare the answer with the deepest part of your putter.
FAQ
Will a mallet cover fit a centre-shafted putter?
Not necessarily. The Montela is described for heel-shafted mallets, so its opening may sit in the wrong place for a centre shaft. Check the shaft position and the opening before relying on width alone. If the product listing does not show or specify the opening, ask the seller before ordering.
Are outside dimensions enough to confirm a fit?
No. Outside dimensions include fabric and any padding, so the space available to the head is smaller. Measure width, depth and height of the putter, then compare its shape and shaft position. If the measurements are close, request the cover's internal dimensions rather than counting on stretch.
How should I care for the closure after a wet round?
Take the cover off and let it dry before storing it around the putter. Clear grass and lint from both sides of the hook-and-loop strip so they can make contact, then press the flap shut without forcing it over an oversized head. Follow the seller's care instructions if supplied.
Prices and availability are accurate as of publication and can change.