Best Golf Club Ferrules for Reshafting in 2026: Three Iron Options
Compare golf club ferrules for reshafting by shaft size, collar, finish and quantity, with three iron options and practical fit checks before you order.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Prices and availability are accurate as of the time of publication and are subject to change.
Hireko .355 Iron Ferrules are our best overall golf club ferrules for reshafting when your build calls for a non-collared .355 taper-tip part. The dimensions and dozen count are clearly stated, making them easier to match to an iron or wedge project than a generic assortment.
We compared published listing specifications rather than claiming hands-on testing. These parts suit different builds, so the overall pick is conditional on fit. A ferrule finishes the transition at the hosel; it is not a substitute for a correctly fitted shaft, suitable adhesive or the club maker's assembly instructions.
| Product | Best for | Price |
|---|---|---|
| Hireko .355 Iron Ferrules | Best overall | View |
| JolliLudo .355 Collared Ferrules | Best for spare stock | View |
| Alrhso .370 Silver Ring Ferrules | Best for silver trim | View |
Best golf club ferrules for reshafting: the three picks
Hireko .355 Iron Ferrules
Hireko .355 Iron Ferrules
Hireko's dozen solid-black plastic ferrules are listed for .355-inch taper-tip hybrid, iron and wedge shafts. Each is three-quarters of an inch tall with a .540-inch outside diameter, and the design is non-collared. Those stated measurements make this our overall pick for a conventional build that calls for that exact shape: a club builder can compare the ferrule with the hosel before committing to a whole set. The plain finish also keeps an iron set visually consistent without trim rings. The tradeoff is fit, not appearance alone. It is not the choice for a head requiring a specific collar, and a .355 designation does not establish compatibility with a .370 shaft. Confirm both the shaft specification and hosel geometry first.
Pros
- Twelve plain black ferrules can finish a matching set
- The .540-inch outer diameter and .750-inch height are specified
- Non-collared design suits heads calling for that shape
Cons
- Does not provide the collar needed by some hosels
- The .355 taper-tip specification excludes an assumed .370 fit
JolliLudo .355 Collared Ferrules
JolliLudo .355 Collared Ferrules
JolliLudo supplies 20 black plastic ferrules in the selected .355-inch version, and the listing describes this version as collared. The larger pack earns the spare-stock badge for a builder working on several compatible clubs or keeping extras for later repairs. It also offers a different starting point from Hireko's explicitly non-collared part when a club head calls for a collar. However, the listing does not supply the precise collar geometry, outside diameter or height in its stated details. A generic compatibility claim is not enough to establish fit for a particular head. Ask the seller for measurements and compare them with the club manufacturer's requirements before ordering; if those details remain unclear, choose a documented match instead.
Pros
- Twenty pieces leave more spares for repeated .355 projects
- Black plastic gives the selected set a consistent appearance
- Listed as collared for builds that require a collar
Cons
- Collar dimensions and outside diameter are not stated
- A .355 selection cannot establish fit for every collared hosel
Alrhso .370 Silver Ring Ferrules
Alrhso .370 Silver Ring Ferrules
Alrhso's ten-piece set gives a .370-inch build a distinctive black finish with one silver ring. The listing specifies ABS plastic, a .370-inch inner diameter, .540-inch outer diameter and .750-inch length. That combination earns the silver-trim badge for someone restoring several compatible clubs while wanting a visible accent rather than Hireko's plain black finish. Ten parts cover ten clubs, but provide fewer extras than either of the other packs. The seller describes use with .370 tapered shafts; do not extend that statement to every .370 hosel or assume it solves a shaft-to-head mismatch. Confirm the head's required ferrule shape, the shaft size and the dimensions before buying. The decorative ring changes the look, not the underlying fit requirement.
Pros
- Single silver ring adds a visible accent to the black ABS
- The .370-inch inner and .540-inch outer diameters are listed
- Ten matching pieces cover a multi-club project
Cons
- Ten pieces leave fewer spares than the 12- and 20-packs
- The stated .370 size is not a substitute for checking hosel shape
How to choose the right part
Start with the shaft's documented tip size, then confirm the ferrule shape required by the specific head. Hireko states a .355 taper-tip fit and a non-collared shape; JolliLudo's selected .355 version is described as collared but lacks the measurements needed to prove a particular collar fits. Alrhso states .370. These numbers are selection criteria, not guarantees of interchangeability.
Next compare the outside diameter with the hosel and decide whether the finished height and color suit the set. Hireko and Alrhso both list .540-inch outside diameter and .750-inch height, but their shaft sizes and finishes differ. Allow spare pieces for mistakes or future repairs. If the head requires proprietary dimensions, contact the manufacturer or a qualified club builder rather than forcing a generic part into place.
Before ordering, count the clubs that actually need the same ferrule rather than assuming the whole bag uses identical parts. A mixed set can have different hosel designs even when its clubs look alike. Compare the seller's selected variant with the head manufacturer's documentation, keep the parts labelled, and set aside an extra for each repair where possible. If a measurement cannot be verified, ask a repair professional before buying.
Frequently asked questions
Can a .355 ferrule be used on a .370 shaft?
Do not assume so. The products here specify different shaft sizes, and a nominal diameter alone does not establish the fit of a ferrule at its installed position. Check the shaft maker's specifications and the head's required ferrule design. A club builder can measure the parts and recommend a correctly matched component before assembly.
What does a collared ferrule change?
A collared ferrule includes a section intended to fit a compatible recess at the hosel. Its shape and dimensions must suit that particular head. JolliLudo's listing calls its selected version collared but does not state the detailed collar dimensions, so ask for them rather than assuming that every collared head accepts it.
Are ferrules enough to reshaft an iron?
No. Ferrules are only one component of a reshafting job. The replacement shaft must fit the head, and correct preparation, suitable shafting adhesive and the manufacturer's curing instructions matter to the finished assembly. If the shaft-to-hosel fit is uncertain, have a qualified repairer assess it instead of relying on a decorative sleeve.
Prices and availability are accurate as of publication and can change.